TIG Welding Consumables
by Mig Tig Arc

TIG Welding Consumable Description

Our Price

Forex Pickling Paste

Application
Transparent Pickling Paste especially suitable for pickling welds.
Removes discolourations and annealing colours near and around the welds or other heat treated zones.
Use
Before application read carefully the label on the packaging in respect to safety.
Shake or stir the paste thoroughly and apply an even coating with the Forex Pickling Brush (supplied) onto the welds.
After a pickling time ranging from 20 to 60 minutes flush with high pressure water until the effluent water is neutral.
The local waste water legislation has to be observed!
Consumption
1 kg Pickling Paste for 80 to 150 metres welds
Size of packaging
2 kg

(Note - Comes complete with brush)

TIG Tungstens

Thoriated (RED Tip) Type - DC Current
 and
 Zirconiated (WHITE Tip) Type - AC Current.

1.6mm Thoriated for Steels

2.4mm Thoriated for Steels

3.2mm Thoriated for Steels

1.6mm Zirconiated for Aluminium

2.4mm Zirconiated for Aluminium

3.2mm Zirconiated for Aluminium

Supplied in packets of 10

A15 Mild Steel Tig Rods

A triple-deoxidised copper coated mild steel wire for Tig welding all forms of mild steel especially tube.
BS EN1668:1997:W2Ti
AWS - A5.18:ER70S-2

Available in three diameters

A15 - 1.6mm
A15 - 2.4mm
A15 - 3.2mm

316L Stainless Steel Tig Rods

A filler wire used for 316/316L moly-bearing stainless steels with excellent corrosion and pitting resistance properties.
BS EN ISO 14343 - 19.12.3L
AWS - ER316L

Available in three diameters

316L - 1.0mm
316L - 1.6mm
316L - 2.4mm

308L Stainless Steel Tig Rods

An 18.8 filler wire used to weld corrosion resistant 304/304L stainless steels. It will also weld grades 301, 302, 303 and 305
BS EN ISO 14343 - 19.9L
AWS - ER308L

Available in three diameters

308L - 1.6mm
308L - 2.4mm
308L - 3.2mm

312 Stainless Steel Tig Rods

A filler wire with a high tolerance to dilution recommended for dissimilar joints (stainless - mild) and high strength difficult to weld steels.
BS EN ISO 14343 - 29.9
AWS - ER312

Available in three diameters

312 - 1.6mm
312 - 2.4mm
312 - 3.2mm

5356 Aluminium Tig Rods

A 5% magnesium alloy used to weld similar alloys for use in many marine and chemical plant applications.
ISO EN 18273 - AL 5356
AWS - ER5356

Available in three diameters

5356 - 1.6mm
5356 - 2.4mm
5356 - 3.2mm

4043 Aluminium Tig Rods

A 5% silicon alloy for wrought and cast materials of similar composition but not for use on items to be anodised.
ISO EN 18273 - AL 4043
AWS - ER4043

Available in three diameters

4043- 1.6mm
4043 - 2.4mm
4043 - 3.2mm

Flowmeter Argon

Model No - 1242

This flowmeter is ideal for TIG use.
  0 - 14 lpm. Just adjust the valve and the ball will hover against the required litres per min measurement mark

Parweld Single Stage 1 Gauge 300 BAR TIG Regulator

Model No - E700140

Argon Preset Regulator 3.0 BAR. Designed to provide robust reliability with precise gas control. Suitable for all cutting,  heating and tig operations. Designed to be used with the above flowmeter.

£24.95 (exVAT) Carriage - Free

Parweld Single Stage 2 Gauge 300 BAR Argon Regulator

Model No - E700123

Designed with 2 gauges to indicate cylinder contents and outlet pressure. Outlet gauge is calibrated for flow 0-30 lpm

£24.95 (exVAT) Carriage - Free

Murex Gas Regulators

Murex Gas Regulator Description

Our Price

Murex Saffire Argon Single Stage Regulator

An advanced gas pressure regulator developed to meet a wide range of applications required by modern manufacturing. Designed to meet the new requirements of Standard BS EN ISO 2503, the Saffire Series 1ec combines remarkable reliability with unparalleled safety. Saffire Series 1ec provides for the user a range of unique operational benefits

Gas Regulator Spec Sheet

Murex Ar-2 TIG Single Stage Regulator

This single stage regulator has been preset at 2 bar (30psi) to give a constant performance. It has been designed specifically for Argon-Tig welding and can be used by itself or with a bobbin type flowmeter.