Specialist Products

Product Description

List Price

Our Price

Adjust-O-Magnets
90 Degree Dual Switch Magnet

Features... Strong Holding Force, 2 ON/OFF switches, Precision Machined flat and V-Groove surfaces securely hold flat, round and square workpieces and metal plates. 2 models available

Adjust-O-Magnets
Adjust-O Angle Magnet

Ideal for holding flat and round work pieces in postion. Features... Strong Holding Force, 30-275 degree angle range and Magnet Force of 41Kg, with a weight of only 2.4Kg. Dimensions 114x191x38mm

Adjust-O-Magnets
Snake Magnet

The Snake Magnet comes with two magnet pads and one spring clamp that are interchangeable. The 18 inch flex cable is very easy to manipulate and can be bent and twisted to the desired angle. Magnet Force of 6Kg.

Strong Hand Tools
Welders Angle Clamp

2 and 3 Axis welders angle clamps. For full specification of these high quality welders clamps, see spec page below.

Welders Angle Clamp Specs

600 Series Portable Weld Table, with Mesh Top
Part No - 783980

Easy setup weld table, Dimensions H 92cm x D 62cm x L 102cm, Load capacity 270kg, Weight 24.5kg. Features built in torch holder.

Sureweld CleanTech Kit

Electro-chemical weld discolouration remover. Easily clean away the MIG, TIG or even Spot weld discolouration.

Sureweld CleanTech Kit Further Details

Video Demo

£479.00

Kemper Filter Master Extractor

The Filter-Master, a mobile mechanical filter, is designed and ideally suitable for use at various welding workplaces and conditions. Built of rigid sheet metal construction and finished with incorporating anti corrosive powder coating with the Filter-Master is designed for every day use. Four heavy duty rubber castors allow ease of movement within the factory and the extraction arm can be swiveled by 360. It is therefore very easy to direct the 3m arm into anydesired position. The Filter-Master is the ideal solution to your extraction problems.

Kemper Extractor Further Details

£1,774.00

Kemper Dusty Extractor

Ultra light, flexible and powerful.

These are only some properties of this small pack. Two strong turbines provide an excellent extraction efficiency and high static pressing. The minimum weight makes it very flexible and universal for many different applications. A kemTEX ePTFE membrane filter cartridge provides the filtration of superfine dust below 0.1um,thereby this unit is suitable for the separation of alveole exchangeable Dusts.The advantage of surface filtration is that the filter cartridge can be cleaned. Different nozzles and hoses (optional) are shown on our further details link page please enquire for prices. Available in 230 volts.

Kemper Dusty Further Details

£1,196.00

Tusker Elephant Welding Shelter

The Tusker Elephant Shelter (multi-purpose shelter) is a ready assembled foldaway mobile shelter, fabricated using a sturdy zinc plated tubular steel. The shelter is suitable for use with Tusker range of reinforced PVC curtains or heavy duty canvas. The cover has press-studded access on two facing sides, which enables easy access for both personnel and machinery.
This cover is HD Canvas, not PVC

Tusker Elephant Shelter Further Details

£TBA

Tusker Acoustic Absorber and Barrier
Model Type - ACPVC

The Tusker Acoustic Absorber and Barrier is a multi-layer curtain with two glass fibre absorption layers bonded either side of a polymeric core, faced on both sides with flame retardant PVC.
Reduces Sound by a minimum of 34.5dB at all frequencies above 1000Hz.
It is available in two sizes
2.0m x 1.2m
2.0m x 2.4m

£TBA

Two Sizes Available

2.0m x 1.2m

2.0m x 2.4m

Prices - £TBA

SWP Welding Shelter

A highly versatile, portable welding shelter made from a flame retardant material. Size is 2 x 2 x 2m. Includes frame.

SWP Green Canvas Flame Resident Canvas Curtainl

Size 6 ft x 6 ft

Our latest flame retardant welding screen which comes complete with collapsible steel framework, canvas and eyelet rings

SWP Green Canvas Flame Resident Canvas Curtainl

Size 8 ft x 6 ft

Our latest flame retardant welding screen which comes complete with collapsible steel framework, canvas and eyelet rings

 LWB250 Welding Blanket

Tusker LWB250 is a lightweight, flexible material with a green finish. Effectively protects from glare and sparks and has a Class 1 rating is BS EN 476-7. Designed for use in light-duty welding or grinding applications. Available in blanket form

Tusker LWB250 Welding Blanket Further Details

 NEO250 Welding Blanket

Tusker NEO250 is fully coated with flame-retardant black neoprene and withstands continuous temperatures up to 150C. Designed for use in welding or grinding applications, to protect from welding sparks, light welding splatter and lare. Must be used at an angle to facilitate splatter run-off. BS EN 476-8, 1 hour rating. Available in blanket form.

Tusker NEO250 Welding Blanket Further Details

 WBN11 Welding Blanket

Tusker Weldstop (WBN11) is an exclusive medium duty asbestos-free, woven glass fibre material. Designed by Safety First Manufacturing to contain molten metal with a high degree of flexibility, Tusker Weldstop Eleven Plus conforms to BS EN 476-8 and has a 2 hour fire rating. Available in blanket form,

Tusker WBN11 Welding Blanket Further Details

 PU28 Fire Barrier

The PU28 Fire Barrier is Glass fabric PU coated both sides is most commonly used in the thatching and roofing industries, as a flexible alternative to rigid fire-board. The material provides Passive Fire Protection with a high temperature treated glass fabric coating on both sides and a silver/grey pigmented flame retarded polymer. Enhanced with mineral salts and vermiculite to increase performance and features a PU coating to suppress any irritant dusts. It has a 75 minute fire-resistance rating.

Tusker Fire Barrier Further Details

Evolution Bora 2800 Magnetic Drill

New from Evolution their latest magdrill package enabling you to drill up to 28mm for the fantastic price of only £199.00.

 Standard equipment includes: 1 mag bag, 12mm drill chuck and key,1 oil tank, 1 quick release oil pipe, 3 hex keys, 3 handles, 1 guard+ 2 butterfly screws, 2 spring washers and 1 chain

Bora 2800 Spec Page

Bora 2800 Video Demo

Rage 185mm Multipurpose Circular Saw by Evolution

Patented RAGE technology: Cuts Steel, Aluminium, Wood & Plastics easily without compromise. Easily cuts wood with nails in No coolant required and produces virtually no sparks. Collects wood and metal chippings automatically. Advanced performance; out performs normal cutting saws. RAGE blade system cuts up to 50 metres of 6mm steel! High quality construction with 12 months warranty.

Rage 185mm Video Demo

Rage2 355mm Multipurpose Cut Off Saw by Evolution

RAGE 2 comprehensively outperforms abrasive saws. Multipurpose - More Economical - Improved Guarding - Increased Durability

Patented RAGE technology: Cuts Steel, Aluminium, Wood & Plastics easily without compromise. Faster and cleaner cuts than an abrasive saw. The RAGE 2 leaves no burr and offers an instantly workable finish. Economical performance, the RAGE blade system will produce up to 1000 cuts in mild steel box section. No coolant required and virtually no sparks are produced. Fast action swivel clamp enables cuts from 0-45°. The Hi-torque gearbox reduces motor stresses, improving performance and durability. High quality construction with 12 months warranty. Blade included, eye and ear protection included.V-clamp included for easy clamping of bar and box section.

Rage2 355mm Video Demo

Rage3 255mm Multipurpose Sliding Mitre Saw by Evolution

Patented RAGE technology: Cuts Steel, Aluminium, Wood & Plastics easily without compromise. Faster and cleaner cuts than an abrasive saw. The RAGE3 leaves no burr and offers an instantly workable finish. Economical performance, the RAGE blade system will produce up to 750 cuts in mild steel box section. No coolant required and virtually no sparks are produced. Compound tilt and slide mechanism offers a solution to almost all common applications. The Hi-torque gearbox reduces motor stresses, improving performance and durability. High quality construction with 12 months warranty. Blade included.

Rage Video Demo

Arc Welding Rod Quiver

Model No - 1141

Ideal for keeping rods at optimum temperature for welding. This dual-votlage, heated electrode quiver is designed for use on installations with 110v or a 240v supply. Ideal for site work it can maintain an even temperature of 100c. Capacity: 9kgs. Internal dimensions: 120 x 500 x 110mm

Arc Welding Rod 300C Portable Oven

Model No - 1122

Ideal for keeping rods at optimum temperature for welding. This portable drying oven is designed to operate in rugged site conditions with a Thermostatically controlled temperature range of 100c-300c. Capacity: 13.6kgs. Internal dimensions: 115 x 480 x 115mm. Available in 240v or 110v.

Arc Welding Rod 350C Oven DV

Model No - 1120

Ideal for keeping rods at optimum temperatire for welding. Dual Voltage 110V or 240V supply. This stationary drying oven is robustly made with a thermostatically controlled temperature range of 100c-350c. Capacity: 136kgs

Internal dimensions: 465 x 480 x 465mm

Arc Welding Rod 500C Oven DV 03

Model No - 1126

Ideal for keeping rods at optimum temperatire for welding. Dual Voltage 110V or 240V supply. This high temperature baking oven is robustly constructed with solid state controls it gives an accurate temperature control of 0c to 500c. Capacity: 136kgs. Internal dimensions: 425 x 455 x 515mm

Sureweld Surestud M8

Suitable for mild steel, stainless steel, aluminium and most common metals. Welds M3-M8 studs, pins, nails, tags, etc. One sided operation with no reverse side marking. Simple and reliable to set and operate. Supplied complete with the kit of fasteners, various size collets and slide hammer for dent pulling. Particularly suitable for removing dents in aluminium bodywork.

Spec Sheet

£1,793.00

MTA Tec Clean 100 Weld Cleaner

The MTA Tec-clean 100 is designed to safely remove the discolouration of a weld on stainless steels & similar metals providing you with a clean finish without needing hazardous pickling pastes.

Spec Sheet

£526.00

 MTA TIG Feed 40
Cold Wire Feeder

This unit is designed as an easy add on for all TIG welding machines & torches for automatic systems or hand welding of ferrous & non ferrous materials.

The benefits of using the TIG FEED 40

• Superb high quality TIG welds
• Much higher productivity than using filler rods
• Reduced wastage of filler material
• High repeatability due to very precise control of the filler wire
• For manual welding reduces the skills needed to achieve top results

Spec Sheet

£1,469.00

MTA F2000i

Convert your welder generator into a MIG Welder, with the new device.
In line unit and therefore requires no additional supply, only welding cable connections. All aluminium construction for good strength and low weight. DC constant current or constant voltage power sources, straight or reverse polarity. Gas valve fitted as standard so can use gas with wire or gasless wire. Contactor fitted as standard so torch is not continuously live. Arc voltage sensing wire feed speed for arc stability. Works with input voltages of between 21 and 100v dc (will weld down to 15 volts).Welding current range of 50 to 200 amps. Takes 5kg Spools

Spec Sheet  

£tbc

MTA F4000i

Convert your welder generator into a MIG Welder, with the new device.
In line unit and therefore requires no additional supply, only welding cable connections. All aluminium construction for good strength and low weight. DC constant current or constant voltage power sources, straight or reverse polarity. Gas valve fitted as standard so can use gas with wire or gasless wire. Contactor fitted as standard so torch is not continuously live. Arc voltage sensing wire feed speed for arc stability. Works with input voltages of between 21 and 100v dc (will weld down to 15 volts).Welding current range of 50 to 300 amps. Takes 5kg Spools

Spec Sheet  

£tbc