|
The TIG FEED 40 shown has the following functions; precise wire speed control, sensitivity control for automatic start & stop of wire, wire pulse control, pool delay timer, inch forward & reverse & remote socket.
This unit is designed as an easy add on for all TIG welding machines, it is designed to be simple to set up & to use. The feeding of the filler wire is done automatically with the welding current making this unit perfect for high productivity TIG welding. The pool delay timer allows for the welding pool to form before starting the feed, sensitivity control allows the feed to start & stop automatically with the welding current & to stop during slope down time if required, sensitivity control also allows for the wire to pulse in time with the welding current if required, the adjustable pulse allows the wire to dab into the welding pool independently of the welding current or in synchronisation with the welding pulse if the power source is set to pulse.
The remote socket is used for connecting various remote controls, the basic version gives inch forward, reverse & control of speed or more complex remotes can also stop & start the power source & control the welding amps. Many other different configurations & options are available including; TIG torch connected directly to the TIG FEED, can be interfaced with a PLC etc, digital meter to display Amps or speed, etc. The TIG FEED 40 is supplied with a Teflon liner, torch bracket & wire guide.
Technical Specification TIG FEED 40 AUTOMATIC
Wire speed range 0-7 Metres per min (can be faster or slower if required)
Auxiliary supply 110V 3 Amps (others available on request)
Pool delay timer 0-10 seconds
Filler wire size 0.8mm up to 3.2mm
Independent Pulse frequency 5HZ-0.5HZ
Welding current range 20-400 Amps AC or DC (10-200A version available on request)
|
