|
Plasma Cutters
|
Plasma Cutter Description
|
List Price
|
Our Price
|
|
10mm Cut |
Invert Fusion Cut 40 Plasma Cutter
Light weight and portable, Minimal distortion on thin metal, Cuts any metal, Mild Steel,Stainless Steel, Aluminium, etc.
All you need is 230V and Compressed Air. No combustible gases required. Comes with all accessories ready to use. Generator friendly
Plasma Cutter Spec Sheet
|
£699.00
|
|
|
|
SWP Invert-R CUT40 Plasma Cuttter
Rugged Internal Support Frame, Generator Friendly, Pilot Arc Ignition, Complete with Air Regulator, Clean Cut to 10mm, Dual Voltage ideal for site work. 1 Year Warranty
Plasma Cutter Spec Sheet
|
£695.00
|
|
|
8mm Cut  |
Sureweld Plasmatec 31 Plasma Cutter
Lightweight and portable with excellent cutting performance. Low priced consumables. Cuts mild and stainless steel, aluminium, brass, copper etc. Supplied with quality Trafimet torch. Fully variable current control - optimum cutting performance. 4 LED indicators warn of – Low voltage, Inadequate air, Power on and Thermostat operation. Air filter/reg supplied. Carry/shoulder strap. Fan cooled.
Two Year Warranty
Includes FREE Consumables!
Plasma Cutter Spec Sheet 
|
£715.00
|
|
|
10mm Cut |
Sureweld Plasma 41 Plasma Cutter
An inverter based plasma capable of cutting mild steel & Boron Steel cleanly up to 10mm thick. Features: 3 LED information panel including torch under voltage, air fault, general fault and power on. Requires 55-70 PSI and a 230v supply to operate this unit. Weighs only 12kg.
Two Year Warranty
Plasma Cutter Spec Sheet
Video Demo
|
£909.00
|
|
|
18mm Cut |
Sureweld Plasmatec 60 Plasma Cutter
Lightweight and portable plasma cutter capable of cutting up to 18mm, 3 Phase supply required, cuts mild and stainless steel, aluminium, brass, copper, etc. Supplied with a quality quick-connect type torch. HF starting on this model. 4 LED indicators worn of low voltage, low air power, and thermostat operation. Fan cooled.
Two Year Warranty
Plasma Cutter Spec Sheet
|
£2,033.00
|
|
|
|
Sureweld Plasmatec 90HF Plasma Cutter
Lightweight and portable with excellent cutting performance. Low priced consumables. Cut mild and stainless steel, brass, aluminium copper etc. Fully variable current control for optimum cutting performance. 4 LED indicators warn of – low voltage, inadequate air flow, power on and thermostat operation. Air filter/regulator supplied. Fan cooled. Quick release central connector for torch. Plasmatec 90HF has CB150 torch
Two Year Warranty
Plasma Cutter Spec Sheet
|
£2,572.00
|
|
|
|
Sureweld Plasmacut 160HF Plasma Cutter
Robustly built and compact. The heavy duty transformer is designed to give excellent duty cycles making it suitable for heavy-duty use. Pilot arc system for smooth and reliable arc starting. Fan cooling and transformers with chopper technology give excellent duty cycles. Built-in air regulator and filter unit minimise problems caused by poor air supply. Pressure gauge and indicator lights show when machine is ready to cut. On-off switch and thermostatic overload protection. Amperage selection switch. Standard central connector for torch. Stylish TRAFIMET torch with 6 metre lead and safety trigger – the latest in plasma torch design giving a comfortable operating position with the ergonomically sculpted handle and head geometry. Interlock switch operated by the external nozzle ensures operator safety when changing torch consumables.Low cost consumables with long operating life. PLASMACUT 160E is fitted with the CB150 torch
Two Year Warranty
Plasma Cutter Spec Sheet
|
£4,397
|
|
|
22mm Cut |
STEL Thor 61 Plasma Cutter
The Stel Thor 61 is a versatile and unique single phase plasma cutting machine. It is ideally suited to light and medium plasma cutting applications where only a single phase 230V supply is available and it only requires 32A to deliver full performance.
On maximum power the maximum duty cycle consumes only 9kVA, and the cutting capability of the machine is upto 22mm (depending on material).
The STEL Thor 61 has a compact, strong cabinet and weights only 18kg making it ideal for applications where the machine needs to be taken to the work piece.
The STEL Thor 61’s versatility makes the unit suitable for a wide range of industries where the cutting requirement is mild steel, stainless steel, aluminium and many other metals.
A further benefit of the Thor 61 is its continuous pilot arc, which allows easy cutting of perforated materials.
Plasma Cutter Spec Sheet
|
£1905.00
|
|
|
40mm Cut |
STEL Thor 103 Plasma Cutter
New Model!
The STEL Thor 103 is a versatile three phase plasma cutting machine which is ideally suited to medium and heavy duty plasma cutting applications where a three phase 400V supply is available and only requires 20A to deliver full performance.
On maximum power and maximum duty cycle the STEL Thor 103 consumes only 10.5kVA and has a cutting capacity of up to 40mm. It also has a strong, compact cabinet and weighs 40kg making it ideal for applications where the machine needs to be taken to the work piece.
The STEL Thor 103’s versatility makes the unit suitable for a wide range of industries where the cutting requirement may be mild or stainless steel, aluminium and many other metals.
A further benefit of the Thor 103 is its continuous pilot arc, which allows easy cutting of perforated materials.
Plasma Cutter Spec Sheet
|
£4283.00
|
|
|
|
Cebora Plasma 3100 Plasma Cutter
Variable Power Output for Perfect Cutting Speed. Auto Re-Ignite for Cutting Mesh. Particularly Suited to the Automotive Market. Where Metal Sheets are Overlapped. Can be Set to Cut Through Just One Sheet.
Particularly Useful on Car Bodies
Plasma Cutter Spec Sheet
|
£1,895.00
|
|
|
|
Cebora Plasma Prof 37c Plasma Cutter
Will cut any metallic material with minimum distortion (Mild Steel 10mm). Very quick and easy to use. Economic cutting process. Easily manouvered in the workshop. Air ignition. Suitable for vehicles using sophisticated electronics.
Plasma Cutter Spec Sheet
|
£1,885.00
|
|
|
|
Cebora Plasma Prof 55 Plasma Cutter
Will cut any metallic material with minimum distortion (Mild Steel 15mm). Very quick and easy to use. Economic cutting process. Easily manouvered in the workshop. Uses HF ignition.
Plasma Cutter Spec Sheet
|
£2,395.00
|
|
|
|
Cemont Sharp 6k Plasma Cutter
lasma Cutter with Built in Air Supply. 6mm Max Cut Capacity. Portable and lightweight(12kg) inverter based plasma cutter with built in compressor. High quality cutting on all conductive materials including steel, stainless steel, aluminium, copper, brass, etc. Operated from 16 amp single phase supply. Able to cut gratings and thin galvanised steel. 240 volt single phase. 2 year Warranty
|
£1,289.00
|
|
|
  
|
|
|
Thermadyne Cutmaster 12 plus Plasma Cutter
Portable 12mm Dual-Voltage Plasma Cutting System.
The all-new THERMAL DYNAMICS TRUE™ Series. CUTMASTER 12 PLUS is one of the most affordable, highest quality 12mm plasma systems on the market. As part of the TRUE Series, you can rely on the CUTMASTER 12 PLUS to cut all day at it’s recommended cutting capacity and to pack more punch when you need it.
3 Year Warranty
Plasma Cutter Spec Sheet
|
£1,790.00
|
|
|
up to 16mm cut |
Thermadyne Cutmaster 10 Plasma Cutter
The CUTMASTER 10 provides the same reliability and performance you have come to expect from the CUTMASTER Series. This 30 Amp unit produces quality cuts from gauge all the way up to maximum cut of 12mm. Unlike some of its competition, the CUTMASTER 10 also offers features like auto pilot restart, ATC torch quick disconnect, and automatic voltage selection. The CUTMASTER 10 is the most durable 10mm plasma cutting machine on the market today. It is the only system in its class to offer the protection of TRUE GUARD™.
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£1,676.00
|
|
|
up to 20mm cut |
Thermadyne Cutmaster 12 Plasma Cutter
The CUTMASTER 12 provides the same reliability and performance you have come to expect from the CUTMASTER Series. This 40 Amp unit produces quality cuts from gauge all the way up to maximum cut of 15mm. Unlike some of its competition, the CUTMASTER 12 also offers features like auto pilot restart, ATC torch quick disconnect, and automatic voltage selection. The CUTMASTER 12 is the most durable 12mm plasma cutting machine on the market today. It is the only system in its class to offer the protection of TRUE GUARD™.
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£2,000.00
|
|
|
up to 32mm cut |
Thermadyne Cutmaster 20 Plasma Cutter
The CUTMASTER 20 is one of most powerful and lightest weight 20mm machine on the market today.The CUTMASTER TRUE Series are the only systems that offer the precision of the TRUE Cut Drag Tip Series™. The 60 Amp tip allows the system to drag cut up to 6mm with ease. Giving the absolute best cut quality possible.This unit cuts through mild, stainless, or aluminum up to 32mm thick.
The CUTMASTER 20 combines power with the well known performance and features of the industry-leading 1Torch.
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£2,595.00
|
|
|
up to 38mm cut |
Thermadyne Cutmaster 25 Plasma Cutter
The CUTMASTER 25 weighs in at a mere 19.5 kg almost 50% less than its leading competitor, while still offering superior cutting power. Don’t let the size of this unit fool you, it’s more than capable of cutting 30mm. This unit, like all other TRUE CUTMASTERS, is equipped with the 1Torch.
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£3,135.00
|
|
|
up to 45mm cut |
Thermadyne Cutmaster 35 Plasma Cutter
The CUTMASTER 35 is one of the fastest cutting 35mm machine on the market today. This unit’s light weight compact design combined with multiple voltage selection makes it the most portable and powerful cutting machine available. This unit combined with the 1Torch has a maximum cut capacity of 40mm. More cut capacity than any other system in its class!
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£4,435.00
|
|
|
up to 55mm cut |
Thermadyne Cutmaster 40 Plasma Cutter
The CUTMASTER 40 is the heavy weight of hand held cutting systems. This unit comes in a compact-light weight package, but don’t let that fool you. It offers enough cutting power to cut 50mm material. This compact unit, like all other CUTMASTERS, comes standard with the 1Torch. Providing you with the well known comfort and reliability famous throughout the industry.
3 Year Warranty
Includes FREE Consumables!
Plasma Cutter Video
Plasma Cutter Spec Sheet
|
£4,920.00
|
|
|
12mm cut  |
Thermadyne Drag-Gun Plus Plasma Cutter
Portable Plasma Cutting System with Built-in Air Compressor, 1/2” inch (12mm) Genuine Cut, Full Cut Capacity at 230V @ 15-35 Amps, maximum convenience and portability, powerful performance, maximum arc visibility for excellent operator control. Ready to cut right out of the box, just plug it in!
Plasma Cutter Spec Sheet
|
£2,055.00
|
|
