|
ARC / Inverter Welders
|
ARC / Inverter Welders Description
|
List Price
|
Our Price
|
|
|
NEW - Murex Tradesarc 150
Highly portable, manual metal arc welding machine for the general fabrication and repair and maintenance welder.
Although compact, this new machine, with its impact resistance polymer case, is designed to cope with the rigours of everyday industrial use and it is equiped with a host of performance enhancing features. The TradesArc is capable of welding alloyed and non-alloyed steel, stainless steel and cast iron using electrodes with a diameter range of 1.6 - 3.2mm. Built in accordance with IP23 for safe outdoor use. Extra long mains cable capability
Spec Sheet
|
£621.00
|
|
|
|
NEW - Murex Tradesarc 200
Highly portable, manual metal arc welding machine for the general fabrication and repair and maintenance welder.
Although compact, this new machine, with its impact resistance polymer case, is designed to cope with the rigours of everyday industrial use and it is equiped with a host of performance enhancing features. The TradesArc is capable of welding alloyed and non-alloyed steel, stainless steel and cast iron using electrodes with a diameter range of 1.6 - 4.0mm. Built in accordance with IP23 for safe outdoor use. Extra long mains cable capability. Adjustable hot start, for improved weld starts. Adjustable arc force, sets the intensity of the arc for improved weld quality.
Spec Sheet
|
£1,283.00
|
|
|
|
Murex Tradesarc 151iAs
The Murex Tradesarc 151iAS is a new small, portable, inverter based power souce for MMA welding or for DC TIG using the lift arc method. The unit can provide from 10 to 150A single-phase electricity supplies. Automatic supply voltage sensing circuitry is used so that no internal tap changes are required. On 110V supplies, due to the much higher mains input currents required, welding over 110V is limited to increasingly low duty cycle and a 110V supply of not less that 3kVA rating is required
Spec Sheet
|
£962.00
|
|
|
|
NEW - Murex Transarc 250
Highly portable, manual metal arc welding machine for the general fabrication and repair and maintenance welder.
Although compact, this new machine, with its impact resistance polymer case, is designed to cope with the rigours of everyday industrial use and it is equiped with a host of performance enhancing features. The TradesArc is capable of welding alloyed and non-alloyed steel, stainless steel and cast iron using electrodes with a diameter range of 1.6 - 5.0mm. Built in accordance with IP23 for safe outdoor use. Extra long mains cable capability. Adjustable hot start, for improved weld starts. Adjustable arc force, sets the intensity of the arc for improved weld quality.
Spec Sheet
|
£1,998.00
|
|
|
|
Murex Transarc DC303ie
A 300amp 3 three phase rugged industrial inverter (2 year guarantee) with a remote control option. 2 year warranty
Spec Sheet
|
£2656.00
|
|
|
|
Thermal Arc 150 SE
The 150SE is a 150 amp inverter arc welding power source designed for stick and scratch start TIG applications. This unit normally operates on a 230v 13amp supply and is voltage protected for generator use.
Spec Sheet
|
£504.00
|
|
|
|
Thermal Arc 155 SE
The Thermal Arc 155 SE site package is a 150A DC Inverter arc welding power source with 4m electrode holder assembly, 4m earth cable assembly, mains cable with factory fitted 32A 110v plug, complete with Thermal Arc site case. The unit operates on single phase 110v or 230v Smartlink(tm) input voltage and has input voltage protection for use on generators. The robust heavy duty casing and IGBT technology design, with built in arc force control, make it the ultimate site tool for all light fabrication and maintenance and repair applications with 3.25mm stick electrodes.
Spec Sheet
|
£715.00
|
|
|
|
Thermal Arc 200 S
A new 200 amp single phase stick welder from Thermadyne This machine features Lift tig, arc control, hot start and digital meters. 3 year warranty.
Spec Sheet
|
£1308.00
|
|
|
|
Thermal Arc 300 S
A new 300 amp 3 phase stick welder from Thermadyne This machine features Lift tig, arc control, hot start and digital meters. 3 year warranty.
Spec Sheet
|
£2049.00
|
|
|
|
Inverter Fusion 130MA
The single-phase 230V Marvel 130 MA has been developed utilising the very latest in inverter design technology and incorporates a MSD auto voltage sensing arc force control that provides for automatic hot-start electrode ignition. When activated a specially developed short circuit device switches the power converter off so that electrode stick down is virtually eliminated. Uses up to 3.2mm standard electrodes.
Spec Sheet
|
£340.00
|
|
|
|
Inverter Fusion 160MA
The single-phase 230V Marvel 160 MA has been developed utilising the very latest in inverter design technology and incorporates a MSD auto voltage sensing arc force control that provides for automatic hot-start electrode ignition. When activated a specially developed short circuit device switches the power converter off so that electrode stick down is virtually eliminated. Uses up to 3.2mm standard electrodes.
Spec Sheet
|
£398.00
|
|
|
100% Duty Cycle
|
Inverter Fusion 151MA - 110V
These British made inverters utilise the very latest advances in both digital control and electronic technology. All units are of rugged construction and carry a 2 year guarantee.
Spec Sheet
|
£585.00
|
|
|
|
Inverter Fusion 180MA
These British made inverters utilise the very latest advances in both digital control and electronic technology. All units are of rugged construction and carry a 2 year guarantee. Uses up to 5.0mm standard electrodes.
Spec Sheet
|
£670.00
|
|
|
|
Sealey Inverter MW140
A top selling 140 amp inverter for ARC or TIG welding applications using the scratch start method. Features ARC force circuitry making the unit suitable for welding from 1.6mm up to 3.2mm electrodes.
Spec Sheet
|
£461.45
|
|
|
|
WholeWeld TWN815241 ARC 1000 package
Ideal for DIY repair and car welding. This 85 amp inverter weighs only 3kg and works on a 13amp plug.
Spec Sheet
|
£255.99
|
|
|
|
MTA Tig Start 180i HF
This machine turns your Inverter Arc Welder into a HF Tig Welder.
The Tig Start 180i HF is a light duty Tig box which runs of the arc voltage of any DC constant power source, including MMA, Inverter, and engine driven machines. No additional power supply is needed. No more gas valve torches, wasted gas, contaminated tungstens, etc.
Spec Sheet
|
£298.00
|
|
|
Newly Released Machine
|
MTA Tig Start 190 AC/DC
TIG box to fit any MMA power source AC or DC
Universal TIG box which will connect onto any constant current stick welding power source to give excellent Tig welding performance at low cost
Spec Sheet
|
£599.00
|
|
|
|
Cemont Puma S1400
NEW MODEL
Heavy duty single phase inverter M.M.A. / Touch T.I.G. machine, for general purpose use. Features include robust front and rear profiles in tough ABS plastic to protect from accidental damage, hot start and Anti stick device. This machine is ideal for maintenance and on site fabrication. Welding Current Range 5 - 130amps, Duty Cycle @ 35%. 130amps, Weldable Electrodes 1.6 - 3.25mm, 240 volt Single phase. 2 Year Warranty
|
£489.00
|
|
|
|
WholeWeld DZ10012 Welding Trolley
The DZ10012 trolley measures 720x430x780mm when assembled.
A black painted , robust and solidly-constructed trolley, designed to accommodate portable MIG welders and inverter Power sources. (self assembly required)
|
£86.95
|
|
|
ARC Features Explained
|
|
|
Hot Start
|
is a built-in device which produces an ideal boost to the output voltage, which eases electric arc ignition.
|
|
Anti-Sticking
|
is a built-in device that switches off the welding power source if the electrode sticks to the material being welded - thus preventing against overloading the unit and easing removal of the electrode.
|
|
Arc Force
|
prevents against short-circuits. It can be manually adjusted on high output machines and is pre-set on all others.
|
